Embossing FAQ's
Discover Everything You Need to Know About WOW Embossing Powders
Frequently Asked Question?
Welcome to our dedicated FAQs page for Embossing Products!
Whether you’re a seasoned embossing enthusiast or just starting your crafting journey, this is your go-to resource for all things related to our renowned embossing powders.
Have a question you don’t see answered here?
Give us a shout over on our contact us page
It states your powders are anti static, but I get bits sticking on my work?
All our powders are double treated for static. This doesn't mean that they are anti moisture so if you handle your work, oils in your hands will transfer to the Cardstock, thus creating a base for the powder to stick to. Try to handle your cardstock from the sides. We also, strongly recommend that you don't decant the powders as our jars are treated to be anti-static. For the same reason, we also recommend only ever using metal spoons/scoops when working with the powders, rather than plastic.Â
I've found little white balls in my powder, what is this?
We add a couple of special products to our powders which make them perform so much better than the other powders on the market.Â
The white balls are formed when they remove moisture from the powder.Â
This is nothing to worry about, it is perfectly normal and just a part of what makes our powders so fantastic! Â
When you heat the product the white balls just disappear and will not affect the finish.Â
Are your powders vegan friendly ?
We get asked this a lot and the simple answer is a resounding YES!! Â
There are no animal bi-products in our powders nor are they tested on animals.Â
What are the different sizes of powder and how do I know what I've got?
On the jar you'll see letters next to the product code, either an R, SF or UH, please see below for their meanings. Â
It's really worth noting that our regular grade powder is very much like a detail powder you might get from another brand and works well on sentiments and fine lines, but the Super Fine powders allow you to emboss the absolute finest lines & details.Â
Please note: the exception is if they have glitter in them or other sizes mixed in.Â
Regular ( R )Â - All our powders are available in this grade. The particles are made the correct size to suit most applicationsÂ
Superfine ( SF )Â - When the Regular grade powder overflows the edge of a line or a character a Superfine powder is required to give a perfectly crisp image. It will not give the highest raise but on a thin line it will feel just as high as the regular product.Â
Ultra High ( UH ) - This grade is a very chunky product. It is used for the Triple Embossing Technique and when a large area is to be embossed. It will give a high raise but will not give a crisp result with regular or detailed stamps.Â
Â
What do the other letters on the jars mean?
When I heat emboss my paper curls, how can I stop this?
This is caused by moisture from the paper and the ink pad. All you have to do is turn it over and heat from the other side. You will find this flattens it out but depending on the thickness of your card you may have to do this a couple of times.Â
This can also be reduced by ensuring that you heat your tool up to reach optimum temperature before bringing it to your paper, and keeping the heat moving so that no one area is heated for too long.Â
Do I have to use an Embossing Ink pad when inking?
No, not at all but it is our preferred one. You can use any Pigment ink as these sit on top of the cardstock and they take longer to dry. We don't recommend dye or alcohol based inks as these dry too quickly. You can also use or Refill Tool, Brush Tool & Pen.Â
How do I know when it's done?
If you tip your head to the side you'll be able to see it melting, as soon as you see it melt, move the heat tool and "chase" the melting powder until the whole design is done.Â
When you tilt the design in the light you should see an even shine across the whole embossed area; if you see any dull spots these parts need a little more heating.Â
(However, when heated too much, the embossing powder will melt right into the cardstock and you will lose both the shine and the raised effect. If this has happened then you can't bring that back unfortunately.)Â
How far do I hold the heat tool away from the Cardstock?
 Approximately 1.5" is good. If you go further away it will take longer to melt and if you go closer you run the risk of burning the Cardstock. Remember it's best to under do it and you can always go back and heat a bit more.Â
Can I use a hairdryer?
The simple answer is no...a hairdryer gives lots of blow and not a lot of heat and a heat tool gives lots of heat and not a lot of blow. The powder will blow off and not melt.Â
What does it mean when a powder is opaque?
Our Opaque powders are made with a white base and they will completely cover anything they are put on.
What is the best Cardstock for stamping and embossing on?
The smoother the better, a coated Cardstock is also recommended. We do a WOW Superior Smooth Bright White Card Stock that's perfect for embossing on.Â
Is there a size between the 15ml jar and the 160ml jar?
No, we don't sell our powders in any other quantities. (All of our powders aren't available in the larger sized jars.)
Is there a tip to using the glitter embossing powders?
We recommend you always shake them before use to really make sure that the powder and glitter are well distributed but otherwise use them in the same way as the powders. Â
We do always recommend heating from underneath so the glitter can't 'blow away'. Â
Can you burn the powder?
Well, it's not really burning, but it will liquify and soak into the card stock and go very flat, but you can burn the card stock if you hold it in one place for too long.Â
Remember always under do it and then you can go back and heat a little more.Â
Should I heat from above or below the Cardstock?
If you heat from above you run the risk of blowing the powder off, you will get a smoother finish by heating from below, but this will depend on the media you are heating on i.e. A very thick chipboard would have to be heated from above. Â
When heating from above hold the heat tool at least 1.5" away. Â
Our Dual Speed Heat Tool is powerful enough to heat through a medium weight chipboard (USA Version in the UK we know this at thick cardboard).Â
Should I re-ink each time when triple embossing?
It is always recommended that you re-ink to apply more powder for each layer, making sure the previous layer has cooled down, it is possible to do this technique without re-inking but you will have to work very quickly and on a fairly small surface area.
What does core colour mean?
This is the colour of powder inside the powder particle. Our opaque powders generally have a white core, this will make a difference when using these with Melt-It, as when melted they will give a 'marbled' effect and make the original colour much paler. Â
This white core means that Opaque powders work really well on darker card stocks, and you'll get the true colour without any effect from the colour below it.Â
What's the difference between the thicknesses of the powders?
There are actually four grade sizes, and you'll find the info on each size in our Technical Area.Â
Does WOW! have an Angel Policy?
We are happy for our Stamps to be used for commercial gain, as long as each image is hand stamped.Â
Â